Increase your rooftop productivity by taking advantage of these labor-saving products from Carlisle SynTec Systems.
Find productivity-boosting products and information by looking for the productivity booster clock logo on the Carlisle website.
Productivity-Boosting Products
The state-of-the-art Carlisle Training and Education Center offers classes and hands-on training for applicators, architects, and consultants.
Learn More
Rigid high-density roof insulation panels ideal for re-roofing and new construction. Lightweight and easy to cut, handle, and install.
Used for direct application over metal decks. Self-adhered,cold applied product quickly create an air- and vapor-tight seal.
This spray gun-applied adhesive requires no stirring or waiting for flash-off, can be used in cold temperatures, is quick to apply, and has a 5-minute set-up time. Approved for use with both EPDM and TPO membranes.
Adheres FleeceBACK® membranes with superior staying power and strength. Decreases setup time compared to installations that use traditional bonding adhesives.
Water-based, wet lay-in, one-sided dispersion adhesive for smooth-backed PVC and FleeceBACK® PVC and KEE HP membranes.
Pre-molded PVC Universal Corners require no stretching and are ideal for flashing corners on a variety of details.
Pre-molded PVC Outside Corners require no stretching or cutting and are ideal for flashing outside corners on a variety of details.
PVC Split Pipe Seals are ideal for quickly and efficiently flashing pipes 1” to 6” in diameter.
Pre-molded PVC Inside Corners require no stretching or cutting and are ideal for flashing inside corners on a variety of details.
Prefabricated PVC Square Tubing Wraps are available in three sizes for quickly and efficiently flashing square penetrations with obstructions.
PVC Pipe Seals are injection-molded, pre-formed flashings for pipes .75” to 8” in diameter and provide a quick and efficient way to waterproof round pipe penetrations.
Pre-molded TPO Universal Corners require no stretching and are ideal for flashing corners on a variety of details.
Pre-molded TPO Inside Corners require no stretching or cutting and are ideal for flashing inside corners on a variety of details.
TPO Pipe Seals are injection-molded, pre-formed flashings for pipes .75” to 8” in diameter and provide a quick and efficient way to waterproof round pipe penetrations.
Prefabricated TPO Split Pipe Seals are ideal for quickly and efficiently flashing pipes 1” to 6” in diameter.
Pre-molded TPO Outside Corners require no stretching or cutting and are ideal for flashing outside corners on a variety of details.
Prefabricated TPO Square Tubing Wraps are available in four different sizes for quickly and easily flashing square penetrations with obstructions.
This steel insulation plate allows applicators to stand while installing. The AccuTrac system can provide a 38% labor savings in comparison to traditional installation methods.
These accessories feature pre-applied adhesive which saves time and labor and reduces the likelihood of improper installation.
Used for stripping-in flat metal edging, eliminating the need for costly PVC-coated metal or two-piece clip-on edge metal.
Non-reinforced EPDM with FAT reduces the time required to create seams between membrane panels.
Carlisle’s patented APEEL Protective Film guards the TPO membrane against scuffs and dirt accumulation during installation.
Carlisle’s TPO and EPDM SAT membranes come with pre-applied adhesive to help you save time and labor and use less ...
Factory-Applied Tape saves labor and improves the quality of EPDM seams. Single packs can be used for smaller, cut-up projects.
Revolutionary membrane attachment method that provides a fully-adhered EPDM, TPO, or PVC system without the use of adhesives.
TPO membrane intended for use in mechanically-fastened direct to combustible deck applications that require a UL Class A fire rating.
A Carlisle representative will be in touch to discuss the specifics of your project to determine if it is eligible.